Ranger 29 Base Station - 100 watts+
Product Description
Flip Down Feet Elevates the front of the radio for easier access!
Includes Noise Filter (GNF), Automatic Noise Limiter (ANL), and Noise Blanker.
Transmit & Receive Clarifier.
4 pin mic jack.
Echo and talkback.
"S" Meter, Modulation Percentage (AM), Power Calibrated (AM & SSB), SWR.
White LED's.
Two rear mounted fans for Max CoolingSPECIFICATIONS GENERAL Type: Citizen band / "Freeband" / Export transceiver Frequency range: Export mode 25.615-28.315 MHz// 10 m mode 28.765-29.205 MHz Channels / tuning steps: 240 (6*40) Mode: AM / FM / SSB Frequency control: PLL/CPU Frequency stability: ?% Clarifier or Delta tune: ±? KHz Power supply: Mains: (3-pin IEC C14 connector) or 13.8 VDC (3-pin connector) Current drain / power consumption: RX: ? A @ 13.8 VDC TX: ? A @ 13.8 VDC Antenna impedance / connector: 50 ohm / SO-239 Dimensions (W*H*D): 286*121*343 mm (11.25*4.75*13.5") Weight: 5.44 Kg (12 lb) Other features: PA. ANL/NB. Talkback. Roger beep. Echo. Dimmer. +10 KHz button. SWR meter and SWR alert. Dual cooling fans.
RECEIVER SECTION Receiver system: Double conversion superheterodyne 1st IF: 10.7 MHz 2nd IF: 455 KHz - Ceramic filter: LT455HTs Sensitivity: Selectivity: Image rejection: AF output power / speaker: 10 W at 5% distortion / 8 ohm External speaker connector: 3.5 mm TRANSMITTER SECTION RF output power:
Max power AM: 25 W (Carrier / dead key) - 120 W PEP FM (RMS): 50 W SSB (PEP): 100 W Modulation system: Max FM deviation (Factory set): ±3 KHz Spurious emissions: Better than -65 dB Microphone impedance / connector: 300 ohm / 4-pin (Metal locking ring connector, Cobra Type) Microphone input level: unkn mV ***** *****
*****
TERMS:
YOU ARE REQUIRED TO AGREE TO THESE TERMS IN ORDER TO PURCHASE FROM THIS WEB SITE.
I BELIEVE IN QUALITY BEFORE QUANTITY! (And from the sales I'm receiving, so do you!)
SO IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! Let me repeat that, IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! I SIMPLY REFUSE TO RUSH MY BUILDS.
Each radio goes through 24 hours minimum of burn-in testing when it's finished. IT WILL BE RIGHT WHEN IT LEAVES MY SHOP!
Normal turn around times;
"Major Custom radio's" 280 to 320 business days.
"Custom/Modified radio's" 45 to 60 business days depending on model.
"Stock/No option radios" are usually 1 to 2 weeks.
Depending on the difficulty of your build or the builds in front of it, this time could be longer.
"Major Custom" in this case means that you have added an option that requires a significant modification(s) to the stock radio that takes more than 3 hours to install. Such as the SP-1a, AD-203, upgrading amp deck, LesComm RCI Noise Filter, etc. are considered Major Custom builds.
"Custom/Modified" examples include LesComm Enhancements, Basic Clarifier mod, Amp Switch, Hi Cut Filter, etc. just to name a few. However if you add a lot of these small upgrades it could move your order to the "Major Custom" category.
"Stock/No option" means just that. These receive only a general tune up.
***Does not apply to Scanners. Scanners ship within 48 hours of purchase.
Customers are taking advantage of the MANY custom options we offer . Depending on the difficulty of your build OR THE BUILDS IN FRONT OF IT, this time could be longer!
There are NO REFUNDS for custom radio, amplifier or power supply orders. NO EXCEPTIONS! NO EXCEPTIONS!
SO BE SURE BEFORE YOU ORDER!
20% restocking fee on "as new, non-customized" radio returns. Radios are built AFTER they are ordered in the order of "payment" received.
AGAIN, THERE ARE NO REFUNDS OR RETURNS ON CUSTOM RADIO, AMPLIFIER OR POWER SUPPLY ORDERS, AND KITS, NO EXCEPTIONS. So be sure BEFORE you order!
This is how it works folks. When you place an order for one of our custom radios we immediately (that day) order the necessary parts needed to build that radio including the donor radio, and set them aside for your build. So we have already invested your money in your order. We do this to prevent coming up short of the parts needed because it was discontinued or changed. (Which happens a lot!) I know this is a long time folks. But I'm only one person. I will work as fast as I can, without compromising quality, to get your order out. So as it says above, if you are an impatient person, do not order from me.
YOU ARE REQUIRED TO AGREE TO THESE TERMS IN ORDER TO PURCHASE FROM THIS WEB SITE.
We very much appreciate your business. And to all of my many, many repeat customers a very special thank you. Tells me I'm doing something right! 73 Everybody! Copyright © LestersCustomTruckShop All Rights Reserved. __________________________________________________________________________________________________________________________________________
YOU ARE REQUIRED TO AGREE TO THESE TERMS IN ORDER TO PURCHASE FROM THIS WEB SITE.
I BELIEVE IN QUALITY BEFORE QUANTITY! (And from the sales I'm receiving, so do you!)
SO IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! Let me repeat that, IF YOU'RE IMPATIENT, DO NOT ORDER FROM ME!! I SIMPLY REFUSE TO RUSH MY BUILDS.
Each radio goes through 24 hours minimum of burn-in testing when it's finished. IT WILL BE RIGHT WHEN IT LEAVES MY SHOP!
Normal turn around times;
"Major Custom radio's" 280 to 320 business days.
"Custom/Modified radio's" 45 to 60 business days depending on model.
"Stock/No option radios" are usually 1 to 2 weeks.
Depending on the difficulty of your build or the builds in front of it, this time could be longer.
"Major Custom" in this case means that you have added an option that requires a significant modification(s) to the stock radio that takes more than 3 hours to install. Such as the SP-1a, AD-203, upgrading amp deck, LesComm RCI Noise Filter, etc. are considered Major Custom builds.
"Custom/Modified" examples include LesComm Enhancements, Basic Clarifier mod, Amp Switch, Hi Cut Filter, etc. just to name a few. However if you add a lot of these small upgrades it could move your order to the "Major Custom" category.
"Stock/No option" means just that. These receive only a general tune up.
***Does not apply to Scanners. Scanners ship within 48 hours of purchase.
Customers are taking advantage of the MANY custom options we offer . Depending on the difficulty of your build OR THE BUILDS IN FRONT OF IT, this time could be longer!
There are NO REFUNDS for custom radio, amplifier or power supply orders. NO EXCEPTIONS! NO EXCEPTIONS!
SO BE SURE BEFORE YOU ORDER!
20% restocking fee on "as new, non-customized" radio returns. Radios are built AFTER they are ordered in the order of "payment" received.
AGAIN, THERE ARE NO REFUNDS OR RETURNS ON CUSTOM RADIO, AMPLIFIER OR POWER SUPPLY ORDERS, AND KITS, NO EXCEPTIONS. So be sure BEFORE you order!
This is how it works folks. When you place an order for one of our custom radios we immediately (that day) order the necessary parts needed to build that radio including the donor radio, and set them aside for your build. So we have already invested your money in your order. We do this to prevent coming up short of the parts needed because it was discontinued or changed. (Which happens a lot!) I know this is a long time folks. But I'm only one person. I will work as fast as I can, without compromising quality, to get your order out. So as it says above, if you are an impatient person, do not order from me.
YOU ARE REQUIRED TO AGREE TO THESE TERMS IN ORDER TO PURCHASE FROM THIS WEB SITE.
We very much appreciate your business. And to all of my many, many repeat customers a very special thank you. Tells me I'm doing something right! 73 Everybody! Copyright © LestersCustomTruckShop All Rights Reserved. __________________________________________________________________________________________________________________________________________